Steca Solarix MPPT 3020 and 5020 are the new solar charge controllers with the Maximum Power Point Tracking (MPPT).
These particular charge controllers are suitable for all common versions of crystalline modules but also for thin film modules. They are optimally suited for solar systems with module voltages higher than the battery voltage.
With Steca Solarix MPPT increase the energy efficiency of the module
Steca‘s efficient MPP tracking algorithm always provides the maximum usable power of the module, significantly increasing energy yield, especially in poor weather conditions (cloud cover, winter, diffused light).
The Steca Solarix MPPT charge controllers combine state-of-the-art charging technology with high efficiency, professional battery care with numerous programming options, modern design, excellent protection functions and an intuitive LC display with menu guidance.
The main features of charge controllers are:
- MPPT algorithm
- High power and efficiency in smart dimensions
- 4 step charge
- Equalisation charge
- LVD function with automatic reconnection (schedulable)
Electronic protection functions
- Overcharge protection
- Deep discharge protection
- Reverse polarity protection of module, load and battery
- Automatic electronic fuse
- Short circuit protection
- Open circuit protection without battery
- Reverse current protection at night
- Overtemperature and overload protection
- Load disconnection on battery overvoltage
2 versions: 3020 and 5020
The new Solarix MPPT is available in 2 versions: the 3020 of 12/24 V and an input voltage of 100 V or the 5020 that can suit batteries of 12/24/38 V and an input voltage of 150 V. Both have a degree of protection IP20 and operating conditions between -25 and 40 °C.
Steca Solarix MPPT 3020 – 5020
Steca Solarix MPPT charge controllers available in two sizes, 3020 and 5020
- Maximum Power Point Tracker (MPP tracker)
- Voltage and current regulation
- Multistage charging technology
- Automatic load reconnection
Datasheet English
Fiche technique Français
Datenblatt Deutsch
Hoja técnica Español (EU)
Steca Solarix MPPT are solar charge controllers with maximum power point tracking. These are suitable for all common module technologies and are optimally suited for solar systems with module voltages higher than the battery voltage. In particular, such inexpensive PV modules that are used for grid-connected systems can also be used off-grid.
Steca‘s efficient MPP tracking algorithm always provides the maximum usable power of the module, significantly increasing energy yield, especially in poor weather conditions (cloud cover, winter, diffused light). The Steca Solarix MPPT charge controllers combine state-ofthe-art charging technology with high efficiency, professional battery care with numerous programming options, modern design, excellent protection functions and an intuitive LC display with menu guidance.
Product features
- Maximum Power Point Tracker (MPP tracker)
- Voltage and current regulation
- Multistage charging technology
- Automatic load reconnection
- Monthly equalisation charge
Electronic protection functions
- Overcharge protection
- Deep discharge protection
- Reverse polarity protection of module, load and battery
- Automatic electronic fuse
- Short circuit protection
- Open circuit protection without battery
- Reverse current protection at night
- Overtemperature and overload protection
- Load disconnection on battery overvoltage
Certificates
- Compliant with European Standards (CE)
- RoHS compliant
- Manufactured according to ISO 9001 and ISO 14001
| Solarix MPPT 3020 | Solarix MPPT 5020 | |
| Characterisation of the operating performance | ||
| System voltage | 12 V (24V) | 12/24/48 V |
| Nominal power | 450 W (900 W) | 750/1500/3000 W |
| DC input side | ||
| MPP voltage | 15 V / 30 V / 60 V < Umodul < 150 V | |
| Open circuit voltage solar module (at minimum operating temperature) | 17 V … 100 V (34 V … 100 V) | 17 V / 34 V / 68 V < Umodul < 150 V |
| Module current | 30 A | 50 A |
| DC output side | ||
| Load current | 20 A | |
| Reconnection voltage (LVR) | 12.5 V (25 V) | 12.5 V / 25 V / 50 V |
| Deep discharge protection (LVD) | 11.5 V (23 V) | 11,5 V / 23 V / 46 V |
| Battery side | ||
| Charge current | 30 A | 50 A |
| End-of-charge voltage | 14,1 V (28,2 V) | 14,1 / 28,2 / 56,4 V |
| Boost charge voltage | 14.4 V (28.8 V) | 14.4 V / 28.8 V / 57.6 V |
| Equalisation charge | 15 V (30 V) | 15 V / 30 V / 60 V |
| Set battery type | Liquid | |
| Operating conditions | ||
| Ambient temperature | -25 °C … +40 °C | |
| Weight | 1370 g | 3140 g |
Related products
-
Stand Alone, Charge Controllers
Steca Solsum 0606, 0808, 1010 solar charge controllers
The Steca Solsum continues the huge success of one of the most used SHS controllers. With a power range of up to 10 A at automatically recognized 12 V or 24 V it fits to a system sizes of maximum 240 W.
Full circuit board protection with LED display for simple recognition of battery status. Various connections make it possible to connect easily to solar panels, battery and load. The Steca Solsum F works on PWM as a low loss series controller.
SKU: n/a -
Stand Alone, Inverters Off-Grid
Steca: SolarixPI
The new generation of sine wave inverters Solarix PI are even more robust and safe.
The excellent overload capability combined with the ability to insert in parallel via the accessory PA link 1 to 4 machines make the drive ideal for all plants in the island of small and medium size.
SKU: n/a -
Stand Alone, Inverters Off-Grid
Steca Solarix PLI 2400-24 / 5000-48 / 1000-12
With these features the Solarix PLI can be used in 3 modes:
- off-grid system where the only source of energy are the photovoltaic modules
- off-grid system with backup with the possibility of choosing the priority source (photovoltaic or external)
- UPS where the batteries are charged only from the mains grid and remain in buffer until the blackout.
- Size available: 2400-24 / 5000-48 / 1000-12
SKU: n/a
