Mennekes is a globally recognized brand for energy mobility products as well as for designing and implementing the standard for charging cable connector.
Among the proposed Mennekes products are the charging cables in modes 2 and 3, columns and charging stations Basic, and Wallbox AMTRON.
Charging cables with Mennekes connectors are divided into cables in mode 2 and mode 3.
Cables in mode 2 are characterized by a SCHUKO wall socket combined with a mobile device that can communicate with the car and increase the level of protection. Mode 3, on the other hand, has two type 2 connectors, one for connecting to the pedestal and one for the car.
Wallbox AMTRON is a device for charging electric vehicles in mode 3 with type 2 socket. There are some versions equipped with a measuring counter with integrated type B differential.
The Basic baskets and charging stations proposed allow recharging mode 3 with Mennekes type 2 socket with shutter.
Both Basic and AMTRON are available in 3.7 kW single-phase 22 kW three-phase power.
Energy Mobility Categories
Energy Mobility
Showing 1–15 of 22 results
-
Charging station, Circontrol, Energy Mobility
Circontrol DC eSpeed Basic post
The DC eSpeed Basic post is a DC charging station which can be installed for private application, where quick charge of vehicles is a must (for instance: car rentals, dealerships, private companies…).
Product features:
• Three phase system with single direct current output (DC) with a maximum power of 25kW
• Wide voltage range delivered from 150V to 950V
• Available with CCS Combo or CHAdeMO connector
• Start/Stop buttons
• RGB LEDSKU: n/a -
Charging station, Circontrol, Energy Mobility
Circontrol DC Raption 50-150
Raption is a range of extremely powerful DC charging stations, designed for installations in both public and private locations where electric vehicles have to be charged as fast as possible (less than 30 minutes).
Raption DC is available in the following versions:
- Raption 50 – 50kW DC
- Raption 150 – 150kW DC
Common features:
- OCPP Protocol 1.6 J
- Modem/Ethernet port
- RFID authentication
- Connector configuration available between CCS-CHAdeMO-Type 2 (on request)
SKU: n/a -
Accessories, Circontrol, Energy Mobility
Circontrol DLM (Dynamic Load Management)
Dynamic Load Management (DLM) is a smart system devised by Circontrol for energy management of multiple charging stations that work at the same time, to avoid exceeding the available power.
DML features are:
- Restriction of the maximum power withdrawable from the grid
- Possibility to integrate OCPP
- All the stations charging status can be controlled via SCADA
- RFID authentication
- Building’s energy monitoring
SKU: n/a -
-
Circontrol, Energy Mobility, Wallbox
Circontrol wallbox eNext Elite S 7,4kW / T 22kW
Circontrol wallbox eNext Elite is a wallbox designed to be installed both inside and outside homes, condominiums, workplaces and public parking lots.
- Can be connected to a back-end system via ethernet, 3G/4G and Wi-Fi
- Highest level of protection thanks to integrated DC leakage detection and welding detection.
- RFID reader
- 3.5” color display
- OCPP 1.6J protocol
- Types available: eNext Elite S 7.4kW single-phase and eNext Elite T 22kW three-phase wallbox.
SKU: n/a -
Energy Mobility, Huawei, wallbox
Huawei Smart Charger: SCharger-7KS-S0 – SCharger-22KT-S0
The Huawei Smart Charger represents a very versatile solution for charging electric vehicles.
- 4 kW single-phase or 22 kW three-phase
- Type 2 socket
- Recharge mode 3
- Authentication methods: RFID, Bluetooth, App
- Communication: WiFi, Ethernet
- OCPP 1.6 and Modbus TCP protocols
- Available: SCharger-7KS-S0 / SCharger-22KT-S0
SKU: n/a -
Charging station, Energy Mobility, Mennekes
Mennekes AMEDIO Professional+
Mennekes AMEDIO Professional + is the charging station designed for the company, commercial, and hotel car parks, it guarantees an intelligent and sustainable charging infrastructure for car parks reserved for the company and customers.
- Security of investments thanks to state-of-the-art electronics
- Flexible counting options
- 2 x type 2 sockets with hinged lid for 22 kW respectively charging power and high operational safety
SKU: n/a -
Energy Mobility, Mennekes, Wallbox
Mennekes AMTRON Professional+
Mennekes AMTRON® Professional + has been designed for company and commercial vehicle fleets, hotels, restaurants etc … thanks to state-of-the-art technology and electronics, easy access to recharge and easy management by the facilities are guaranteed.
- Wallbox specially designed for industry and commerce
- Integrated modem for data transmission according to OCPP 1.6 j
- Flexible counting options
- Charging point with a maximum charging power of 22 kW
SKU: n/a -
Charging station, Energy Mobility, Mennekes
Mennekes: charging columns Basic – Smart
The charging columns and the Basic wall charging stations allow charging in mode 3 with type 2 socket </strong > Mennekes with shutter.
Both have a pleasant appearance and are manufactured with electro-galvanized sheet steel casings available in three color variants: black RAL 9005 (SW), silver RAL 9006 (SI) and Yellow RAL 1021 (GE). All are with degree of protection IP 44.
SKU: n/a -
Accessories, Energy Mobility
MENNEKES: charging connector mode 2
I veicoli elettrici vengono ricaricati normalmente in modalità 3, poiché questa è la modalità di ricarica più sicura.
Quando si è per strada e non è disponibile un infrastruttura per la ricarica in modalità 3, la modalità 2 conforme a IEC 61851 è l‘alternativa più sicura.
La ricarica avviene tramite una comune presa domestica o industriale (spina a muro SCHUKO® o CEE), ma il cavo in modalità 3 integra le funzioni di protezione e controllo nel Cable Control and Protecting Device (IC-CPD).
Questo tipo di cavo unisce la praticità di un dispositivo mobile con un aumentato del livello di protezione (SPE-PRCD) attraverso un dispositivo di comunicazione con il veicolo (modulo PWM) oltre al dispositivo SPE-PRCD che controlla permanentemente la connessione del conduttore di terra ed il modulo PWM comunica la corrente massima di carica.
In caso di anomalie, la ricarica viene interrotta così da proteggere veicolo e utilizzatore. I cavi Mennekes in modalità 2 superano i requisiti normativi offrendo funzioni aggiuntive, rendendo sicura e semplice la ricarica in modalità 2.
SKU: n/a -
Accessories, Energy Mobility
Mennekes: mode 3 charging cable
Il connettore di ricarica standard nell’Unione Europea sia lato veicolo che lato infrastruttura denominato di tipo 2 sviluppato da Mennekes in Germania gestisce tutte le altre classi di potenza esistenti: dalla tensione monofase 230 V alternata che si trova nei normali ambienti domestici al collegamento trifase con corrente fino a 63 A.
Con questo connettore di ricarica, a seconda se si è in presenza di tensione monofase o trifase si possono trasmettere potenze da 3,7 kW a 43,5 kW (con dimensioni simili alla spina cee 16 A tradizionale).
Vista la completa architettura di sicurezza elettronica, il connettore Mennekes tipo 2 non ha protezione meccanica da contatto così da ottenere un connettore durevole, robusto e che non necessita di manutenzione.
SKU: n/a -
Energy Mobility, Mennekes, Wallbox
Mennekes: Wallbox AMTRON
Every Mennekes AMTRON Wallboxes are devices for charging electric vehicles in mode 3 with charging socket on the side Mennekes type 2 infrastructure as per standard European.
There are various versions of Wallbox AMTRON depending on the type of authorization for recharging: free , key, via APP or RFID card .
There are versions equipped with a calibrated measurement counter and others that integrate the type B differential switch .
- Standard E
- Xtra E / R
- Premium E / R
SKU: n/a